Tag - the cutting machine

How to solve the problem of graphic cutting

The cutting pattern is incomplete or uneven, which will directly affect the cutting effect and fail to pass the requirements in the process. Next, we will tell you how to solve this problem through the video.   Incomplete Cutting Graph We need to check hardware and software when the cutting graph is incomplete . If it is a hardware failure, we need to replace the motor. If it is a software problem, we need to troubleshoot the CNC system, check whether the [...]

How to solve the panel cannot read the U disk?

The panel of the laser cutting machine is like a computer, controlling the operation of the machine.  When we connected the USB flash drive to the panel, we found that there was no response and the contents of the USB flash drive could not be read. First, we need to check whether the connection port is loose and whether there is dust in the U disk interface. If there is no problem in the above aspects, we can start with [...]

【MACTRON CLASSROOM】How To Correct Parameters Of Cutting Machine?

In the process of cutting, workpiece surface is heated to vaporization temperature quickly by focused laser beams, forming High pressure steam and spraying outward at supersonic speeds. When high-pressure vapors spray outward, the melted materials are blown away in the kerf till the workpiece is finally cut. The laser cutting machine equipped with CCD vision positioning system is not only suitable for various materials and objects, but also can realize automatic positioning and precise cutting operation.   The parameters is a [...]