Tag - laser cutting machine

How to solve the panel cannot read the U disk?

The panel of the laser cutting machine is like a computer, controlling the operation of the machine.  When we connected the USB flash drive to the panel, we found that there was no response and the contents of the USB flash drive could not be read. First, we need to check whether the connection port is loose and whether there is dust in the U disk interface. If there is no problem in the above aspects, we can start with [...]

How to choose a laser cutting machine according to the needs of enterprises?

After years of development, laser cutting machines have more derived types, and their functions and performance have been continuously strengthened and upgraded to become more humane. At present, the types of laser cutting machines that we are familiar with and commonly used include CO2 laser cutting machines and fiber laser cutting machines. For these laser cutting equipment, which ones are better?     CO2 laser cutting machine: Because of the special nature of CO2 lasers, metal and non-metal materials can be processed, mainly [...]

How to replace the laser tube and power supply

In the process of using laser cutting machine, it will encounter many problems. As the main parts of the machine, the laser tube and power supply require frequent maintenance and cleaning. Next, we will explain the replacement of the laser tube and power supply.   Watch the video   Before replacing the laser tube and power supply, you need to cut off the power of the machine.In order to avoid the phenomenon of high-voltage ignition, remember to install an insulating sleeve on the [...]

Application and development trend of three-dimensional five-axis laser cutting technology

Technology development trend: With the more advanced and advanced three-dimensional five-axis laser cutting technology, the performance and function are becoming more and more powerful, the technology development trend is as follows: 1. High acceleration and high speed: product acceleration is getting higher and higher, product speed is getting faster and faster, and production efficiency is getting higher and higher;   2. High cutting speed and high precision: Only with fast cutting speed can the production efficiency be high and the production cost can [...]

How to adjust the focal length of the cutting machine?

As a new generation of large-scale intelligent mechanical equipment, laser cutting machine has the advantages of high processing accuracy, good cutting effect and wide application. It can not only engraving on the material, but also cut the whole board of large-format materials. The method of adjusting the focal length of the marking machine and the cutting machine is slightly different. In this issue, we will teach you two ways to adjust the correct focal length, remember it!   Watch the video   If [...]