How to replace the laser tube and power supply

In the process of using laser cutting machine, it will encounter many problems. As the main parts of the machine, the laser tube and power supply require frequent maintenance and cleaning. Next, we will explain the replacement of the laser tube and power supply.


Watch the video

Before replacing the laser tube and power supply, you need to cut off the power of the machine.In order to avoid the phenomenon of high-voltage ignition, remember to install an insulating sleeve on the outside of the high-voltage line and fix the connection port on the laser tube. The laser tube is fragile and should be installed without local stress.Reasonable use of laser tubes and laser power supplies can play their greater value.


If you are still in doubt during the use of the machine, you can leave a message or call +86-769-26384404, we will be happy to help you!


Share this post