News

News cutting-edge laser technology that gets under your skin

A highly specialist laser capable of analyzing potentially deadly diseases as never before is under development at Heriot-Watt University. The Deep Tissue project is a state-of-the-art laser that aims to carry out greater analysis of biological tissue including skin, bone and even plant life. The three-year project builds upon research carried out by Professor Derryck Reid from the university’s Institute of Photonics and Quantum Sciences (IPAQS), to create a laser capable of gathering tissue data to a depth more than double what is presently available [...]

Mactron carried out multiple disinfection to control of the epidemic

In the face of the still serious epidemic and changing data, Mactron has always maintained the principle of “prevention and control of the epidemic, safety first”. In order to make customers rest assured to buy and use products, The staff carried out multiple disinfection on the product body and packaging before delivery , to ensure that customers receive safe products, effectively protect the rights and interests of consumers. ●Product disinfection: wipe and sterilize with 95% medical alcohol ●Package disinfection: disinfect with [...]

02/29/2020 By machine Company News, News Read more...

The steps to solve the high temperature of laser

We need to confirm the cause of the failure from circuits, connecting lines, and power.

12/28/2019 By machine Company News, News laser equipment，circuits，connecting lines，power Read more...

Effect comparison of different filling methods

In the process of laser marking, we fill the specified graphics or text to make the laser mark the best effect on a specific material. Next, we will compare and present from multiple angles such as type, line spacing, number of times, and margin. Mactron’s laser equipment is widely used in many industries and materials. The diversity of materials makes the filling method especially important. In order to achieve better results, we need to go through multiple tests and comparisons [...]

12/18/2019 By machine Company News, FAQ, News, Service Read more...

Laser Equipment Winter Maintenance Tips

In the winter, the temperature is declining. At this time, we should not only warming ourselves, but also do freeze protection for laser machines to ensure the lifetime of the equipment and reduce the risk cost. As we all know, liquids have a “freezing point”. When the temperature of the liquid is lower than this “freezing point” temperature, it will solidify to form a solid, while the deionized water or distilled water will become larger in volume during solidification, which will “break” [...]

12/12/2019 By machine Company News, News Read more...

How to solve “abnormal sound of the galvo head and the red light beats frequently”

As a modern precision machine, laser equipment is characterized by high precision, high technology and automation. However, improper daily operation will also cause damage to the machine and cause various problems. When we encounter the situation that “abnormal sound of the galvo head and the red light beats frequently”, it is necessary to check in five steps in turn, to find the cause and solve it in time. After completing the above five aspects of inspection, we can basically determine the [...]

11/24/2019 By machine Company News, FAQ, News, Service Read more...

Teach you how to avoid the laser “heavy cold”

The autumn wind is blowing, the winter is approaching, the miles are frozen, and the snow is floating. In the cold winter temperature conditions, if you don’t have careful maintenance, the laser working hard day and night may also have a “heavy cold”: when the ambient temperature drops below the freezing point, the coolant in the laser will change from liquid to solid. The volume of solid coolant will increase significantly, which will create the risk of rising water [...]

11/08/2019 By machine Industry News, News Read more...

How to replace the galvo head and F-theta lens?

The galvo head and F-theta lens are one of the most important components of the laser marking machine. They are often applied to laser operations at 1064 nm (YAG), 10640nm (CO2), 532 nm (green), and 355 nm (UV). When there is a problem with the optics on the laser, we need to replace the new fittings in time and adjust the parameters. Below, we will show you the “correct steps to replace the Galvo Head and F-theta lens.” If you are [...]

11/05/2019 By machine Company News, FAQ, News, Service Read more...

Two-step laser mass spectrometry for more accurate cell research

It is reported that in order to improve mass spectrometry to enhance the study of cytochemical composition, researchers from the University of Münster have developed a method for improving the spatial resolution of matrix-assisted laser desorption ionization (MALDI) mass spectrometry in UK health agencies. Increased by about a thousandth of a millimeter. The researchers called the technique t-MALDI-2 (‘t’ indicates the transmission mode), which uses two lasers: one for generating a smaller focus on the removed material and the other [...]

11/04/2019 By machine Industry News, News Read more...

Laser ultrasound provides a new way of thinking for nondestructive testing

Many industrial buildings, including nuclear power plants and chemical plants, rely on ultrasonic instruments that continuously monitor the structural integrity of their systems without damaging or changing their function. Currently, scientists have developed a new technology that uses laser technology and candle soot to generate effective ultrasound for non-destructive testing and evaluation. A group of researchers are currently using Ultrasonic Nondestructive Testing (NDT), which involves amplification of photoacoustic laser source signals using a nanoparticle array of candle soot and polydimethylsiloxane. [...]